10 Best Oscilloscopes in 2026 for Benchtop, Portable, and Mixed-Signal Testing

Choosing among today’s oscilloscopes means balancing bandwidth, channel count, waveform detail, controls, and budget. The right model can make troubleshooting faster, whether you are repairing electronics, developing embedded hardware, or learning circuit analysis.

This roundup compares ten options ranging from compact multifunction instruments to higher-bandwidth four-channel bench oscilloscopes, with practical guidance for matching features to your work.

Best 10 Oscilloscopes Picks for 2026

Versatile Bench Decoder

Siglent SDS1104X-E

Siglent SDS1104X-E
  • Four analog channels with 100 MHz bandwidth
  • Decodes I2C, SPI, UART/RS232, CAN, and LIN
  • Optional 16-channel MSO and USB AWG expansion

Best For: Embedded-system and multi-signal bench debugging

Advanced Touchscreen Analyzer

RIGOL DHO924S 250MHz Oscilloscope

RIGOL DHO924S 250MHz Oscilloscope
  • 12-bit resolution with 250 MHz bandwidth
  • Built-in AFG and 10 Hz–25 MHz Bode plot
  • Deep memory, fast acquisition, and remote control

Best For: Advanced validation, loop testing, and automation

Budget Protocol Tester

Hantek DSO2D15 150MHz

Hantek DSO2D15 150MHz
  • 150 MHz bandwidth with two channels
  • Arbitrary waveform output included
  • 14 trigger modes and five serial decoders

Best For: Economical education, service, and embedded work

Portable Touchscreen Scope

FNIRSI 1013D Plus 100MHz

FNIRSI 1013D Plus 100MHz
  • 7-inch touchscreen with portable 2.31-pound design
  • 1 GSa/s sampling and two 100 MHz channels
  • Battery power, waveform storage, FFT, and Lissajous views

Best For: Mobile troubleshooting and hobbyist projects

Editor's Choice

Siglent SDS1202X-E

Siglent SDS1202X-E
  • 200 MHz, two-channel desktop oscilloscope
  • 1 GSa/s sampling and 14 Mpts record length
  • Decodes I2C, SPI, UART, RS232, CAN, and LIN

Best For: Bench electronics and embedded-system troubleshooting

Best Multitool

FNIRSI 2C53T 3-in-1

FNIRSI 2C53T 3-in-1
  • 50 MHz, two-channel handheld oscilloscope
  • Built-in 4.5-digit multimeter and DDS generator
  • 3000 mAh battery and 400 g portable design

Best For: Portable repair, automotive work, and hobby testing

Best for Waveform Capture

RIGOL DS1202Z-E

RIGOL DS1202Z-E
  • 200 MHz, two-channel desktop oscilloscope
  • 1 GSa/s sampling with up to 24 Mpts memory
  • 30,000 wfms/s capture and waveform playback

Best For: Lab debugging and intermittent-glitch analysis

Best 12-Bit Detail

RIGOL DHO804 70MHz 4-Channel Oscilloscope

RIGOL DHO804 70MHz 4-Channel Oscilloscope
  • Four analog channels with 12-bit vertical resolution
  • Up to 1.25 GSa/s sampling and 25 Mpts memory
  • FFT, serial decoding, LAN, USB, and HDMI

Best For: Multi-signal embedded and power troubleshooting

Best Portable 4-in-1

FNIRSI DPOS350P 350MHz Handheld Oscilloscope

FNIRSI DPOS350P 350MHz Handheld Oscilloscope
  • 350 MHz bandwidth with 1 GSa/s sampling
  • Integrated spectrum and frequency-response analyzers
  • DDS generator, touchscreen, and 8000 mAh battery

Best For: Portable lab and field signal analysis

Best Deep-Memory Value

RIGOL DS1102Z-E 100MHz 2-Channel Oscilloscope

RIGOL DS1102Z-E 100MHz 2-Channel Oscilloscope
  • 100 MHz bandwidth and 1 GSa/s sampling
  • Up to 24 Mpts memory with 60,000-frame playback
  • Serial decode, LAN, USB, and AUX connectivity

Best For: Bench debugging and long waveform captures

Versatile Bench Decoder – Siglent SDS1104X-E

The Siglent SDS1104X-E is a strong all-around choice among oscilloscopes when four analog channels, serial-bus decoding, and optional mixed-signal expansion are useful for bench troubleshooting. It includes four passive probes and supports I2C, SPI, UART/RS232, CAN, and LIN decoding.

Best For: Engineers and technicians debugging embedded systems and multiple signals on a bench.

Pros:

  • Four-channel design for comparing multiple signals.
  • Supports I2C, SPI, UART/RS232, CAN, and LIN decoding.
  • Includes four passive probes, a USB cable, quick-start materials, and a calibration certificate.
  • Optional 16-channel MSO capability and USB AWG module are available for the four-channel series.

Cons:

  • Digital MSO channels and the USB AWG module are optional rather than included.
  • Its 100 MHz bandwidth may be less suitable for higher-frequency work than some newer models.

Choose this Siglent when channel count and built-in protocol decoding matter more than having the newest display or highest bandwidth. It is a practical, expandable bench instrument.

Advanced Touchscreen Analyzer – RIGOL DHO924S 250MHz Oscilloscope

The RIGOL DHO924S is an advanced oscilloscope for demanding validation and debugging work. Its 250 MHz bandwidth, 12-bit resolution, deep memory, built-in signal generator, and Bode plot support make it especially capable for timing, power, and frequency-response analysis.

Best For: Advanced electronics development, loop testing, power analysis, and embedded communications debugging.

Pros:

  • 250 MHz bandwidth, four analog channels, 1.25 GSa/s sampling, and 12-bit resolution.
  • Up to 50 Mpts memory depth and UltraAcquire up to 1,000,000 waveforms per second.
  • Built-in single-channel AFG and Bode plot analysis from 10 Hz to 25 MHz.
  • Supports USB, LAN, HDMI, browser-based Web Control, and SCPI automation.

Cons:

  • The 16 digital channels require the separately sold PLA2216 probe.
  • The product notes specify that slow sweep and roll modes are unavailable.

For buyers who need more than basic waveform viewing, the DHO924S combines high-resolution acquisition with useful analysis and automation features. Its digital-channel expansion cost should be considered separately.

Budget Protocol Tester – Hantek DSO2D15 150MHz

The Hantek DSO2D15 is a cost-conscious oscilloscope for general commissioning and troubleshooting. It combines 150 MHz bandwidth with two channels, arbitrary waveform output, multiple trigger modes, and five serial-protocol trigger and decode options.

Best For: Students, service technicians, and makers who want broad triggering and decoding features at an economy price.

Pros:

  • 150 MHz bandwidth in a two-channel digital storage design.
  • Supports arbitrary waveform output.
  • Offers 14 trigger modes.
  • Includes five serial-protocol trigger and decode functions.

Cons:

  • Only two channels are available for simultaneous signal measurements.
  • The supplied notes identify it as an economy instrument, so it may lack the refinement of higher-end models.

The DSO2D15 is a sensible value pick when protocol tools and waveform output are more important than a large channel count. It suits a range of education, embedded, communications, and commissioning tasks.

Portable Touchscreen Scope – FNIRSI 1013D Plus 100MHz

The FNIRSI 1013D Plus is a portable oscilloscope designed for convenient field and bench measurements. It has two channels, 100 MHz bandwidth per channel, a 1 GSa/s sampling rate, a 7-inch touchscreen, battery operation, and storage for screenshots and waveform data.

Best For: Mobile troubleshooting, hobbyist projects, and users who value a compact touchscreen instrument.

Pros:

  • Portable 2.31-pound design with a 7-inch, 800 × 480 touchscreen.
  • 1 GSa/s sampling rate and 100 MHz × 2 bandwidth.
  • Built-in 6000 mAh battery provides up to four hours of use.
  • Stores up to 1,000 screenshots and 1,000 sets of waveform data, with FFT and Lissajous views.

Cons:

  • It has only two channels.
  • The listed battery runtime is up to four hours, which may require recharging during longer sessions.

Pick the FNIRSI when portability and touch-based operation are priorities. Its waveform storage, cursor measurements, FFT view, and Lissajous display add useful convenience for hands-on troubleshooting.

Editor's Choice – Siglent SDS1202X-E

The Siglent SDS1202X-E is a capable two-channel option for buyers seeking a desktop oscilloscopes platform with 200 MHz bandwidth. Its 1 GSa/s real-time sampling, 14 Mpts record length, and serial-bus tools make it well suited to detailed electronics troubleshooting.

Best For: Bench work involving embedded systems, serial communications, and longer waveform captures.

Pros:

  • 200 MHz bandwidth with two channels
  • Up to 1 GSa/s real-time sampling
  • 14 Mpts record length
  • Triggering and decoding for I2C, SPI, UART, RS232, CAN, and LIN

Cons:

  • Desktop form factor is less portable than a handheld unit
  • Supplied notes list a country of origin of China

Choose this Siglent when serial-bus analysis and deeper captures matter more than portability. It offers a focused feature set for electronics benches without adding multimeter or signal-generator functions.

Best Multitool – FNIRSI 2C53T 3-in-1

The FNIRSI 2C53T combines a two-channel 50 MHz oscilloscope with a multimeter and DDS signal generator. For buyers comparing oscilloscopes for field service, automotive work, or compact hobby benches, its 400 g handheld design and built-in battery add practical flexibility.

Best For: Portable troubleshooting where oscilloscope, multimeter, and signal-generator functions are useful in one device.

Pros:

  • Three-in-one oscilloscope, multimeter, and signal generator
  • 250 MSa/s sampling with automatic measurements
  • 4.5-digit multimeter with voltage, current, resistance, capacitance, and continuity functions
  • Built-in 3000 mAh battery with up to six hours of standby time

Cons:

  • 50 MHz bandwidth is lower than the two 200 MHz desktop models
  • 1 Kpts record depth is comparatively limited
  • Signal-generator output tops out at 50 kHz

This FNIRSI is the practical choice when portability and multiple test functions outweigh deep memory or higher bandwidth. It is especially convenient for technicians, schools, and hobbyists who want fewer separate instruments.

Best for Waveform Capture – RIGOL DS1202Z-E

The RIGOL DS1202Z-E is a two-channel, 200 MHz desktop oscilloscope designed for capturing and reviewing complex signals. Its 1 GSa/s sampling, up to 24 Mpts memory, 30,000 wfms/s capture rate, and waveform recording make it a strong fit for debugging intermittent behavior.

Best For: Electronics labs and embedded bring-up requiring deep memory, fast waveform capture, and serial-bus analysis.

Pros:

  • 200 MHz bandwidth, two analog channels, and external trigger input
  • Up to 1 GSa/s sampling and 24 Mpts memory
  • Up to 30,000 wfms/s capture rate helps reveal intermittent glitches
  • USB, LAN, recording/playback, and RS232/UART, I2C, and SPI decoding

Cons:

  • Desktop design is less convenient for mobile use
  • Full 24 Mpts memory is not available when using both channels simultaneously

The RIGOL stands out among these oscilloscopes for its combination of deep memory, rapid capture, and event review. It is a particularly sensible pick when occasional glitches or long captures are central to the workflow.

Best 12-Bit Detail – RIGOL DHO804 70MHz 4-Channel Oscilloscope

The RIGOL DHO804 is a strong choice for engineers who need versatile oscilloscopes with four analog channels, fine vertical detail, and practical protocol-analysis tools. Its 70 MHz bandwidth, 1.25 GSa/s sampling rate, and up to 25 Mpts memory support power, embedded, and sensor-interface troubleshooting.

Best For: Embedded bring-up, switching-power checks, and multi-signal timing analysis.

Pros:

  • 12-bit resolution, four channels, and up to 25 Mpts memory
  • Fast waveform acquisition with search and navigation for intermittent events
  • FFT, automatic measurements, serial decode, LAN, USB, and HDMI connectivity

Cons:

  • 70 MHz bandwidth is lower than some specialized high-speed oscilloscopes
  • Its broad feature set may be more than basic single-signal measurements require

The DHO804 stands out when channel count and vertical resolution matter more than extreme bandwidth. A 7-inch touchscreen and SCPI support also make it practical for everyday bench work, teaching, and documented lab workflows.

Best Portable 4-in-1 – FNIRSI DPOS350P 350MHz Handheld Oscilloscope

The FNIRSI DPOS350P combines several useful instruments in a portable package, making it one of the more feature-rich oscilloscopes for lab and field work. It pairs 350 MHz bandwidth with a spectrum analyzer, frequency response analyzer, and DDS signal generator.

Best For: Portable signal analysis, EMI checks, filter tuning, and loop-stability testing.

Pros:

  • 350 MHz bandwidth, 1 GSa/s sampling, and 2 mV/div sensitivity
  • Built-in spectrum and frequency-response analyzers support deeper signal evaluation
  • DDS generator, 8000 mAh battery, touchscreen, and USB-C charging improve portability

Cons:

  • Two analog channels provide less simultaneous signal coverage than four-channel models
  • Its 47 Kpts memory depth is more limited than the deeper-memory options in this roundup

The DPOS350P is appealing when portability and integrated test functions are priorities. Its combination of waveform capture, Bode-plot-oriented analysis, and signal generation can reduce the amount of separate equipment needed for field or bench experiments.

Best Deep-Memory Value – RIGOL DS1102Z-E 100MHz 2-Channel Oscilloscope

The RIGOL DS1102Z-E is a practical option for buyers seeking oscilloscopes with 100 MHz bandwidth, two channels, and substantial capture memory. Its 1 GSa/s sampling rate, waveform recording, and serial decoding features suit electronics debugging and longer-duration signal investigations.

Best For: Embedded troubleshooting, education labs, and extended waveform capture.

Pros:

  • 100 MHz bandwidth with up to 1 GSa/s real-time sampling
  • Up to 24 Mpts memory and recording/playback of as many as 60,000 frames
  • Waveform capture up to 30,000 wfms/s plus RS232/UART, I2C, and SPI decoding

Cons:

  • Only two analog channels are available
  • It weighs 8.83 pounds, making it less convenient for portable use

The DS1102Z-E favors structured bench work over handheld convenience. Deep memory, intensity-graded display, and LAN, USB, and AUX connectivity make it well suited to reviewing events, integrating with a test setup, and documenting results.

How We Picked These Oscilloscopes

We selected models across several realistic use cases rather than focusing on one specification alone. The comparison considers rated bandwidth, available channels, sampling performance, vertical resolution, display and controls, portability, and useful extras such as signal generators, multimeters, protocol decoding, or waveform memory. We also considered whether a model is best suited to a permanent electronics bench, field service, education, or occasional troubleshooting.

Specifications should be interpreted in context. A higher bandwidth rating can help with faster signals, but probe quality, sample rate, memory depth, software, and measurement controls also affect real-world results.

Quick Comparison

Best For What to Prioritize Suitable Options
General bench work Two or four channels, automatic measurements, reliable triggering Siglent SDS1104X-E, RIGOL DS1202Z-E
Higher-frequency projects At least 200MHz bandwidth and appropriate probes RIGOL DHO924S, Siglent SDS1202X-E, FNIRSI DPOS350P
Mixed-signal development Four channels, protocol tools, and strong triggering Siglent SDS1104X-E, RIGOL DHO804
Portable troubleshooting Compact design, touchscreen, or integrated functions FNIRSI 1013D Plus, FNIRSI 2C53T
Learning and light repairs Simple controls, adequate bandwidth, and low cost Hantek DSO2D15, RIGOL DS1102Z-E

Key Buying Factors for Oscilloscopes

Bandwidth and Sample Rate

Choose bandwidth based on the fastest edge or frequency you need to inspect, not only the nominal clock rate. For digital circuits, fast transitions can contain harmonics far above the stated logic frequency. Sample rate should provide enough points to show waveform shape accurately, especially during single-shot events.

Channels and Resolution

Two channels are enough for many voltage-versus-time measurements, while four channels are valuable for comparing clocks, data, power rails, and control signals simultaneously. Higher vertical resolution can reveal smaller ripple and noise changes, although effective performance depends on the instrument’s noise floor and settings.

Triggering, Memory, and Measurements

Look for stable edge triggering, pulse and video options when relevant, deep memory for long captures, and automatic measurements that reduce repetitive calculations. Protocol decoding can be especially useful for serial buses, but verify which standards are supported before buying.

Form Factor and Extra Tools

Bench models generally provide larger displays, more physical controls, and easier long-session operation. Portable or touchscreen units can be more convenient for field work. Integrated signal generators and multimeters may save space, but they should complement—not replace—the oscilloscope capabilities you need most.

Who Should Buy Which Oscilloscopes?

Choose a four-channel model if you regularly debug power, timing, and communication lines together. A 200MHz-or-higher instrument makes more sense for fast digital, motor-control, RF-adjacent, or demanding embedded work. For routine audio, sensors, microcontrollers, and low-speed power troubleshooting, a capable 70MHz-to-150MHz two-channel oscilloscope is often sufficient.

Buy a multifunction FNIRSI-style unit when portability and combined tools matter more than advanced bench controls. Select a RIGOL or Siglent bench model when repeatable triggering, clearer operation, deeper analysis, and sustained development work are priorities. Beginners should favor straightforward controls and dependable probes over chasing the highest headline bandwidth.