Best 10 Compact Camera Counterweights for Balanced Rigs in 2026

Balancing a camera rig is easier, smoother, and safer when you choose the right counterweight. The best compact camera counterweights help fine-tune balance without adding unnecessary bulk.

Below, we focus on compact options for gimbals, jibs, cranes, and PTZ-style setups, with a guide to help you match weight, mounting, and compatibility to your gear.

Best 10 Compact Camera Counterweights Picks for 2026

Gimbal Balancing Kit – SmallRig 3125 Counterweight Kit for DJI and Zhiyun

If you need compact camera counterweights for long-lens gimbal setups, this SmallRig kit gives you a simple way to shift balance behind the camera. It is built for use on popular stabilizers and keeps the hardware small enough to store easily when you are done shooting.

Best For: Gimbal users balancing heavier or longer camera setups on DJI, Zhiyun, or Moza stabilizers.

Pros:

• Designed for balancing cameras on gimbals by mounting weights behind the camera
• Compatible with DJI RS 2/RSC 2/RS 3/RS 3 Pro, Zhiyun Crane 2S/3S/Weebill-S, and Moza Air 2/AirCross 2
• Stackable via 1/4″-20 threaded holes for more balance options
• Made from aluminum alloy and stainless steel for corrosion resistance

Cons:

• Includes only a mounting clamp and two 100g counterweights
• Best suited to compatible gimbal mounting plates and setups

This is a practical pick if you want a compact, stackable counterweight solution with broad gimbal compatibility. It is not the largest kit here, but it is efficient and easy to store.

Crane and Jib Weights – ProAm USA 1 Inch Counterweights, Set of 6

For crane and jib setups, these compact camera counterweights are made to help fine-tune balance with a simple 1 inch inner diameter fit. The set of six gives you multiple small increments, which is useful when you want to dial in a rig without overcorrecting.

Best For: Camera crane and jib operators needing small, repeatable balance adjustments.

Pros:

• Made for camera cranes and jibs
• 1″ inner diameter fits matching hardware
• Each plate weighs 1/4 pound, allowing fine adjustments
• Set of 6 provides multiple weight options

Cons:

• Only works with 1″ ID mounting points
• No other compatibility details are provided in the notes

This set is a straightforward choice when your priority is precise balancing rather than a universal mounting system. It is best viewed as a targeted accessory for crane and jib rigs.

Single Gimbal Weight – SmallRig 200g Removable Counterweight

If you want compact camera counterweights for a gimbal setup, this removable 200g SmallRig option is built for straightforward balancing. Its stacking-friendly design and textured surface make it a practical add-on when you need to adjust weight in small steps.

Best For: Gimbal users who need a single 200g weight that can be stacked with other SmallRig parts.

Pros:

• 200g weight helps balance camera setups on gimbals
• 1/4″-20 screw and threaded hole allow stacking
• Textured surface is designed to increase friction for easier handling
• Made of stainless steel for corrosion resistance

Cons:

• Mounting plate is sold separately
• Additional 100g and 50g weights are optional extras
• Designed around compatible SmallRig counterweight plates

This is a useful single-weight option if you already have the right mounting plate or want to expand an existing SmallRig setup. It is compact, simple, and focused on gimbal balance rather than all-in-one convenience.

Heavy Duty Tube Weight – Manfrotto 3 Lb Counterweight

When you need compact camera counterweights for a more traditional support setup, this Manfrotto 3 lb weight is built around a 1 inch round tube clamp. It is a heavier, purpose-built option for rigs that need a substantial counterbalance rather than tiny adjustment steps.

Best For: Support rigs using 1 inch round tubes that need a heavy counterweight.

Pros:

• Heavy 2.9 lb counterweight for substantial balancing
• Clamp range is 1 inch round tube minimum and maximum
• Simple, dedicated design for tube-based support hardware
• Distinctive orange color for easy spotting

Cons:

• Only fits 1 inch round tube clamp range
• Heavier than smaller fine-tuning counterweights
• No multi-piece stacking or modular details in the notes

This is the most heavy-duty option in the group, so it makes sense for support systems that need real counterbalance rather than lightweight tuning. If your hardware matches the clamp size, it is a straightforward, no-frills choice.

Best for Easy Setup – NEEWER Clamp Kit for DJI RS and ZHIYUN

If you need compact camera counterweights for balancing a gimbal setup with long lenses, this NEEWER kit is built for flexibility. The clamp supports a wide range of DJI, ZHIYUN, and Moza stabilizers, and the stackable 100g weights make it easier to fine-tune balance without tools.

Best For: Gimbal users who want a versatile clamp-and-weight kit for balancing longer camera and lens combinations.

Pros:

• Compatible with DJI RS4/RS4 Pro/RS3/RS3 Pro/RS2/RSC2 and several ZHIYUN and Moza stabilizers
• Multiple 1/4″ threaded holes and stackable bottom sockets give flexible mounting options
• Knurled locking knob makes installation and tightening tool-free
• Aluminum alloy construction is designed for durability and corrosion resistance

Cons:

• Includes only two 100g counterweights, which may not be enough for heavier balancing needs
• Built around gimbal mounting rather than general-purpose camera use

This is a practical choice if you want compact camera counterweights that are easy to position and expand. The strongest appeal is compatibility and adjustability, especially when you need a straightforward way to balance a long-lens setup on a supported stabilizer.

Stackable PTZ Weight Set – 25g, 100g, 125g Counter Blocks

For compact camera counterweights that prioritize simple balancing, this PTZ weight set gives you multiple block sizes and a standard 1/4 screw mount. It is meant to help solve stabilizer imbalance quickly, with stackable weights that can be expanded to match the installation and leveling needs of your rig.

Best For: Users who want a straightforward, stackable counterweight solution for PTZ or DSLR stabilizer balancing.

Pros:

• Available in 25g, 100g, and 125g sizes for adjustable balancing
• Standard 1/4 screw nut mount port offers broad compatibility
• Stackable design makes it easy to expand weight as needed
• Stainless steel construction is made for long-term use

Cons:

• Product details are focused on stabilizer balancing rather than detailed camera-specific use cases
• No clamp or accessory mounting system is included

This is a practical pick when you want compact camera counterweights in small, manageable increments. The modular size options and 1/4 mount make it easy to adapt the weight setup to the balance problem in front of you.

Compact Threaded Counterweight – CAMVATE 1.8 oz 1/4-20

If you want a small, simple option for compact camera counterweights, this CAMVATE piece keeps the design focused on basic balancing. It uses a 1/4″-20 threaded connection, stainless steel construction, and stackable compatibility for use with a gimbal or support setup.

Best For: Creators who need a small threaded counterweight for gimbal or support balance adjustments.

Pros:

• Compact 1.8 oz size is useful when you only need a small amount of added weight
• 1/4″-20 female to male threading supports straightforward mounting
• Stainless steel construction adds durability
• Can be stacked via 1/4″-20 screw and thread for more weight if needed

Cons:

• Single small counterweight may not be enough for larger balancing jobs on its own
• No clamp or multi-piece kit is included

This is the most minimal option in the group, and that can be a strength if you only need a compact camera counterweight for fine adjustment. Its main value is simplicity: thread it in, add weight, and stack more if the setup calls for it.

Balanced Two-Weight Set – NICEYRIG Gimbal Counterweight Set 150g

If you need compact camera counterweights for tuning a gimbal setup, this NICEYRIG set gives you a simple 100 g and 50 g combination for dialing in balance on heavier sides. It is designed for common stabilizers like the DJI Ronin RS2/RSC2 and Zhiyun Weebill S/Crane M2/Plus 3/3S/3, and the removable 1/4" screw design makes it easy to add or swap pieces as needed.

Best For: Gimbal users who want a straightforward, removable 150 g counterweight set for balancing uneven camera loads.

Pros:

• Includes two weights: 100 g and 50 g for flexible balancing
• Universal compatibility with several DJI Ronin and Zhiyun stabilizers
• 1/4" screw and threaded hole allow removable mounting
• Stainless steel construction adds corrosion resistance

Cons:

• Designed for stabilizers and clamp systems, not as a standalone weight solution
• Maximum weight recommendation is listed at 50 g per piece

Overall, this is a practical compact camera counterweights option if you want a small, durable set that can help correct side-heavy camera balance without overcomplicating the rig.

Heavy-Rig Balance Kit – Nitze N28-S4 Counterweight Kit

For compact camera counterweights aimed at more demanding rigs, the Nitze N28-S4 kit is built to help balance heavy cameras with long lenses that cannot be balanced directly on the stabilizer. It combines a mounting clamp with 50 g and 100 g counterweights, plus multiple 1/4" threaded holes so you can adjust placement and stack weights for finer tuning.

Best For: Gimbal owners with heavier camera and lens combinations that need adjustable counterweight placement.

Pros:

• Includes a mounting clamp plus 50 g and 100 g counterweights
• Seven 1/4" threaded holes offer flexible mounting positions
• Anti-scratch rubber pads help protect the gimbal
• Aluminum alloy clamp and stainless steel weights are lightweight and durable

Cons:

• Made for specific DJI RS-series and RSC 2 gimbals, so compatibility is not universal
• Some users may not need the full kit if they only want a single weight

This is a strong choice when compact camera counterweights need to do more than add mass, since the included clamp and stacking options make precise balancing easier on heavier setups.

Minimal Fine-Tuning Weight – LT Easiyl 50g Counterweight Block

If you want a simple compact camera counterweights option for fine balance adjustments, this LT Easiyl 50 g block is made for precise tuning on gimbal stabilizers. It uses a 1/4"-20 screw and threaded hole, so you can mount it to a compatible counterweight clamp or stack another weight on top for more exact balance control.

Best For: Shooters who only need one small, stackable 50 g weight for fine gimbal adjustments.

Pros:

• Single 50 g counterweight for small balance corrections
• Removable and stackable design supports fine tuning
• 1/4"-20 screw and threaded hole increase mounting flexibility
• Stainless steel body with knurled surface for durability and grip

Cons:

• Does not include a mounting clamp
• Only one 50 g piece is included, so larger balance changes need additional hardware

This is the most minimal option in the group, making it a good fit if you already have a clamp and just need a compact camera counterweights piece for small, precise adjustments.

How We Picked the Best Compact Camera Counterweights

To narrow down Compact Camera Counterweights, we looked for options that solve real balancing problems without taking up much space on the rig. Priority went to compatibility with popular gimbals and support systems, practical weight increments, secure mounting methods, and designs that are easy to add or remove during setup.

We also considered whether the weights are useful for stills, video, or broadcast-style rigs, since the best choice depends on how much adjustment you need and how often you reconfigure your setup.

Quick Comparison

In general, lighter modular weights are better for small balance corrections, while heavier single-piece counterweights are better when you need a bigger shift in center of gravity. Clamp-based kits are usually the most flexible for gimbals and rods, while threaded blocks work well on rigs with standard mounting points.

Key Buying Factors for Compact Camera Counterweights

Weight Range and Granularity

Choose a system that matches the size of your imbalance. Fine increments like 25g, 50g, or 100g are ideal for compact cameras, mirrorless bodies, and lenses that only need minor correction. Larger individual weights are better when the rig is front-heavy or when you need to counter a heavier lens, matte box, or accessory.

Mounting Style

Look for the mounting method that fits your rig: threaded mounts, clamp-on kits, rod-compatible plates, or system-specific brackets. A secure mount matters as much as the weight itself, especially on moving rigs where vibration and shifting can affect balance.

Compatibility

Many Compact Camera Counterweights are designed for specific gimbal families such as DJI RS and Zhiyun models. If you use a crane, jib, PTZ head, or generic camera plate, make sure the hardware matches your mounting standard before buying.

Size, Stackability, and Workflow

Smaller blocks are easier to pack and reposition, while modular sets let you stack only what you need. If you travel often or change camera builds frequently, compact, removable weights can save setup time and reduce clutter.

Who Should Buy Which Compact Camera Counterweights?

If you use a modern gimbal and want the most flexible setup, choose a modular counterweight kit with multiple pieces and secure clamping hardware. If your rig needs only a small trim adjustment, a single removable block or a lightweight set is usually enough.

Creators using cranes, jibs, or PTZ platforms should lean toward threaded or bracket-style weights that are easy to mount and keep stable under load. The best Compact Camera Counterweights are the ones that fit your balance problem closely, not just the heaviest option available.