10 Best Camera Counterweights Under 100 for Better Gimbal Balance in 2026

If your gimbal feels front-heavy, rear-heavy, or just hard to tune, the right counterweight can make balancing faster and smoother. Affordable options can solve a lot of real-world rig issues without forcing a full equipment upgrade.

These camera counterweights under 100 focus on practical compatibility, secure mounting, and the weight increments that matter most for mirrorless rigs, long lenses, cages, monitors, and compact cinema setups.

Best 10 Camera Counterweights Under 100 Picks for 2026

Most Flexible Gimbal Kit – NEEWER Clamp + 2x 100g Weights

If you’re shopping for camera counterweights under 100, this NEEWER kit is a practical option for balancing long lenses and other front-heavy setups on compatible gimbals. The included clamp and two 100g weights make it easy to fine-tune balance without reaching for tools.

Best For: Gimbal users who want a flexible, stackable counterweight setup for DJI Ronin, Zhiyun, Moza, and similar stabilizers.

Pros:

• Works with a wide range of stabilizers, including DJI RS4/RS3/RS2/RSC2, Zhiyun Crane, and Moza Air systems.
• Clamp has multiple 1/4″ threaded holes for different mounting positions.
• Counterweights are stackable thanks to 1/4″ bottom sockets.
• Aluminum alloy construction is built for durability and corrosion resistance.

Cons:

• Maximum weight recommendation is 100 g per weight, so it’s not intended for heavier balancing needs.
• Compatibility is focused on specific gimbal systems rather than universal camera rigs.

This kit is a strong pick if you need a simple, adaptable way to balance long-lens or heavy-sided camera setups on supported gimbals. The no-tools clamp design keeps setup quick, while the stackable format gives you room to adjust as your rig changes.

Best Single Stackable Weight – CAMVATE 1.8 oz Threaded Weight

For buyers looking for camera counterweights under 100 with a simple, modular design, this CAMVATE 1.8 oz weight is a straightforward add-on for gimbal balancing. Its 1/4″-20 female-to-male threading lets it stack with other pieces when you need a little more tuning range.

Best For: Users who want a compact stainless-steel counterweight for stacking and fine adjustment on a gimbal or support rig.

Pros:

• 1.8 oz size keeps it in the lightweight balancing category.
• 1/4″-20 female-to-male threading makes it stackable.
• Stainless steel construction adds durability.
• Works for balancing a camera on a gimbal or support.

Cons:

• Sold as a single weight, so additional pieces may be needed for larger balance changes.
• No clamp is included, so it depends on your existing mounting setup.

This is a good no-frills option if you already have a compatible mounting system and just need one compact weight. It’s especially appealing when you want a simple threaded piece that can be combined with other weights as your setup changes.

Compact Precision Weight – NICEYRIG 50g Heavy-Side Weight

If you need camera counterweights under 100 for a heavy-sided camera setup, this NICEYRIG 50g piece is aimed at fine-balancing rigs like the BMPCC 4K/6K on supported gimbals. It threads with 1/4”-20 and can be paired with a compatible clamp when you need up to 150g total.

Best For: Filmmakers balancing heavy-sided cameras or long-lens setups on DJI Ronin and Zhiyun gimbals.

Pros:

• 50g weight is useful for small balancing adjustments.
• Compatible with DJI Ronin S/SC/RS2/RSC2 and Zhiyun Weebill S/Crane series.
• 1/4”-20 threading supports add-on use and stacking with compatible clamps.
• Stainless steel construction is durable and corrosion resistant.

Cons:

• Only one 50g counterweight is included.
• Best results may require the separate Niceyrig universal counterweight clamp.

This weight makes sense when you want a small, precise counterbalance instead of a larger fixed kit. Its main advantage is flexibility: it’s compact, durable, and made to work with common gimbal systems for targeted balance correction.

Best for Cranes and Jibs – ProAm USA 6-Piece 1 Inch Weight Set

For camera counterweights under 100 aimed at larger support rigs, this ProAm USA set is made for cranes and jibs rather than handheld gimbals. Each plate has a 1″ interior diameter and weighs 1/4 pound, giving you a simple way to add balanced mass to a rig.

Best For: Camera crane and jib users who need a matched set of small plates for fine tuning.

Pros:

• Set of 6 plates gives you multiple weighting options.
• Each plate weighs 1/4 pound for predictable incremental adjustments.
• 1″ ID is suited to crane and jib hardware compatibility.
• Useful for fine tuning larger camera support rigs.

Cons:

• Designed for cranes and jibs, not typical handheld gimbals.
• No clamp or mounting system is included in the listing details.

This is the right kind of product when your balancing needs are tied to a crane or jib rather than a compact stabilizer. The six-piece set makes it easier to dial in weight step by step without committing to a single heavy counter.

Balanced Gimbal Pick – DJI RS Series Balance Kit

If you’re shopping for camera counterweights under 100, this SmallRig kit is a practical option for balancing longer-lens camera setups on a gimbal. It mounts behind the camera, uses a clamp with a thumbscrew, and gives you extra weight right where you need it for smoother balance.

Best For: Gimbal users with long-lens setups who need a compact, stackable counterweight solution for DJI, Zhiyun, or Moza stabilizers.

Pros:

• Designed specifically to help balance cameras on a gimbal
• Compatible with DJI RS series, Zhiyun Crane/Weebill, and Moza systems
• Stackable via 1/4"-20 threaded holes for more balance options
• Includes a clamp plus two 100 g counterweights

Cons:

• Made for gimbal balancing, so it is less useful for general camera rig weighting
• Only includes two counterweights in the box

Overall, this is a solid fit if you need a compact balancing kit rather than a generic weight pack. The stackable design and broad stabilizer compatibility make it easy to adapt to different camera-and-lens setups.

Flexible Budget Option – 4-Piece Gimbal Weight Set

For buyers comparing camera counterweights under 100, this VBESTLIFE set is a simple, lightweight way to correct gimbal imbalance. It includes a clip and three detachable weights, so you can combine them as needed to fine-tune your setup without adding more bulk than necessary.

Best For: Photographers and videographers who want a basic, flexible counterweight set for common gimbal balance fixes.

Pros:

• Includes 3 detachable weights plus a mounting clip
• Rubber pad inside the clip helps protect the gimbal and improve grip
• Weights can be used individually or in combination
• Compatible with most gimbals in the market

Cons:

• Maximum weight recommendation is only 86 g
• Less specialized than kits made for specific gimbal models

This is a straightforward budget-friendly balancing accessory if you need flexibility more than premium hardware. The modular weight setup makes it easy to experiment, but it is best suited to lighter balancing jobs.

Advanced DJI Balance Kit – RS 4 Pro Counterweights

If you need camera counterweights under 100 that are aimed at more demanding rigs, this Nitze kit is built for heavy cameras with long lenses. It clamps to the gimbal arm, offers multiple threaded mounting points, and includes both 50 g and 100 g weights for more precise balancing.

Best For: DJI RS users with heavier camera-and-lens combinations that need a more configurable balancing kit.

Pros:

• Made for DJI RS 4 Pro, RS 4, RS 3 Pro, RS 3, RSC 2, and RS 2
• Includes both 50 g and 100 g counterweights
• Seven 1/4" threaded holes give flexible mounting options
• Anti-scratch rubber pads and rust-resistant stainless steel weights

Cons:

• More specialized than a universal weight set
• Best suited to gimbal systems rather than general camera use

This kit stands out when you need more than a basic counterweight and want room to fine-tune balance on supported DJI stabilizers. The multiple mounting positions and included weight sizes make it a strong choice for more complex setups.

Universal Stainless Gimbal Pair – NICEYRIG 150g Counterweight Set

If you need camera counterweights under 100 for fine-tuning a gimbal setup, this NICEYRIG set gives you two removable stainless-steel weights in 50g and 100g sizes. It is built for balancing heavier camera sides on compatible stabilizers, and the 1/4” screw plus threaded hole make it easy to mount or stack with the right clamp.

Best For: Gimbal users who want a simple 50g/100g counterweight pairing for balance adjustments on supported DJI Ronin and Zhiyun stabilizers.

Pros:

• Includes both 50g and 100g weights for flexible balancing.
• Removable design with 1/4” screw and threaded hole.
• Made from stainless steel for corrosion resistance.
• Compatible with several DJI Ronin and Zhiyun gimbals.

Cons:

• Requires a compatible mounting clamp for most setups.
• Only two weights are included in the set.
• Maximum weight recommendation is listed at 50 g per piece.

This is a practical pick if you want a compact, durable counterweight kit for controlled balancing rather than a large multi-piece package. The value is in the mix of two useful sizes and broad gimbal compatibility.

Single-Weight Fine Tuner – LT Easiyl 50g Counterweight Block

For camera counterweights under 100, this 50g block is a straightforward option when you only need a small adjustment on a gimbal stabilizer. It is designed to be removable and stackable, and the 1/4”-20 screw plus threaded hole make it easy to add to a mounting clamp or combine with another weight.

Best For: Users who want a single 50g stainless-steel counterweight for precise, incremental gimbal balance tuning.

Pros:

• Single 50g weight is useful for precise balance adjustments.
• Removable and stackable design adds flexibility.
• 1/4”-20 screw and threaded hole support mounting and stacking.
• Stainless steel construction is durable and rust resistant.

Cons:

• Counterweight only; mounting clamp is not included.
• One-piece package may not suit users needing multiple sizes.
• Works best when paired with compatible mounting hardware.

This is the most focused choice in the group if you already know you need a 50g adjustment. It is simple, compact, and built for fine-tuning rather than full kit flexibility.

Clamp-and-Weight Kit – EaxanPic Universal Gimbal Counterweight Kit

If you want camera counterweights under 100 with a full mounting solution, this EaxanPic kit bundles a clamp with 50g and 100g weights. It is aimed at balancing heavy-sided cameras on compatible stabilizers, and the clamp offers seven 1/4-inch threaded holes plus a scratch-resistant pad for easier positioning.

Best For: Gimbal owners who want a ready-to-use clamp kit with 50g and 100g weights for broader balancing flexibility.

Pros:

• Includes both mounting clamp and counterweights.
• 50g and 100g weights support flexible balancing.
• Clamp has seven 1/4-inch threaded holes for expansion.
• Scratch-resistant pad helps protect the device.

Cons:

• Designed for stabilizer arms within 14mm.
• Bulkier than buying a single weight only.
• May be more hardware than some users need for simple setups.

This kit makes sense if you want a more complete balancing package instead of sourcing a clamp separately. The combination of included hardware and multiple weight options gives it the most setup flexibility of the three.

How We Picked These Camera Counterweights Under 100

We focused on products that offer useful balancing range, dependable mounting hardware, and broad compatibility with popular stabilizers and camera support rigs. We also favored sets with multiple weight increments, since fine-tuning is usually more valuable than a single heavy block.

Another priority was real-world usability: clamps that stay put, thread standards that match common accessories, and designs that are easy to add or remove between shoots. Because this roundup is about Camera Counterweights Under 100, value mattered as much as performance.

Quick Comparison: What Sets Them Apart

Some options are best for gimbals and handheld stabilizers, while others suit jibs, cranes, or universal mounting setups. Smaller 50g and 1.8 oz weights are ideal for micro-adjustments, while 100g and mixed kits give you more room to balance heavier builds.

If you use a DJI Ronin, Zhiyun, or similar system, look first at compatibility and clamp style. If you work with long lenses or a cage-heavy rig, prioritize stackable weights and secure attachment points. For larger camera support tools, broader counterweight sets can be more useful than gimbal-specific kits.

Key Buying Factors for Camera Counterweights Under 100

Compatibility: Make sure the counterweight fits your gimbal, crane, jib, or clamp system. Brand-specific kits often save time and reduce fit issues.

Weight increments: Fine balance work is easier with multiple small weights, while larger increments help when your setup is noticeably front- or rear-heavy.

Mounting security: Look for strong clamps, threaded mounts, and hardware that won’t slip under motion or vibration.

Material and size: Aluminum alloy and compact blocks are common because they add weight without becoming bulky.

Flexibility: A universal kit can be the better value if you switch between camera bodies, lenses, or support systems often.

Who Should Buy What

Gimbal users: Choose a compact, compatibility-focused kit if you mainly balance Ronin, Zhiyun, or Moza stabilizers.

Long-lens shooters: Look for denser blocks or mixed-weight kits that help correct front-heavy setups quickly.

Cinema and cage rigs: Universal clamp-and-weight kits are often the most practical because they adapt to multiple accessory layouts.

Crane and jib operators: A larger fine-tuning set makes more sense when you need repeatable balance across changing payloads.

In short, the best choice depends on how much adjustment range you need and how often you change rigs. If you want the most versatile option, pick a kit with multiple weights and a secure mounting clamp. If you need the simplest solution, match a brand-specific counterweight to your stabilizer and keep the setup compact.